VPN-C

Control of solids
Protection valves

Intended use

Standard and versatile model.

The overpressure and depressure protection valve VPN-C protect the overpressure or depressure that can be in the containers due to the pneumatic pressure filling systems by a tank wagon, the blocking of the filters or the air inlents and outlets, a reduced size of them or due to the effect at the end of the filling procces when the product is finished and there is a uncontrolled filling of high pressured air. Also, this effect is produced in a large way of time due to the fermentation or chemical reactions of the differents products inside the container.

Due to this protection, the valve prevents the formation of cracks, dents and deformations that in many cases leaves the silo out of service.

Function

The valve actuate if there is an overpressure or a depressure that overreaches the presetted values.

Before a high pressure in the silo, the valve opens and allow the exit of the excess of air balancing the pressure. Normally in these cases, there is a part of the product that exits to the exterior. In case of a depressure, there is an inlet of air from the exterior to the container.

Mechanical connection

Use the own valve to place in the top of the silo a mark. For a proper function, the valve has to be mounted in a horizontal plane.

After the welding of the valve, mount it with the screw shackle or by screws depending on the model of the valve.

Dimensions

Approximate measures given in mm.

Technical data


Name	Protection valve
Type	VPN-C ref: 001
Ambient temperature	+80º C
Ambient temperature	20º C – +80° C
Adjusted pressure	50 mbar for overpressure, -5 mbar for depressure (Under request other pressures)
Maximum pressure (adjustable)	100 mbar for overpressure, -12 mbar for depressure
Weight	9,5 Kg
Materials:
Housing	Steel, RAL 7001 coated
Ring	Steel
Connection gasket	EPDM
Water-tight gasket	Caoutchouc foam P.C.E. 30