TM E

Best selling liquid controllers
Control of liquids
Float levels switch

Intended use

The floats are to be used to control the level in the filling and emptying processes of tanks, wells and containers in which scaling non-clean or residual waters are used, with or without foam in its surface.

Function

When the level of the liquid reaches the level of the float switch, the float changes its position an angle, the counterweight inside its deviated and activates a micro switch due to this deviation.

When the level of the liquid overreaches the level of the float switch, the float remains in its position in the water due to the counterweight, makes a strenght to the cable that allow the installation of more floats without rolling their cables and reduces the waste’s adhesion.

It is necessary to install 2 devices to control of the maximum and the minimum levels automatically.

Mechanical connection

It is simple: the switch literally hangs on its own cable at the desired height and is fixed to the ceiling or to one side of the tank.

Dimensions

Approximate measures given in mm.

Technical data


Name	Float switch
Type	TM-E — ref: 001
Density of the product	0,95 Kg/l – 1,10 Kg/l
Maximum pressure	+3 bar
Switching voltage	250 V AC
Switching function	1 NO + 1 NC
Capacity of the contact	10 A / 250 V AC (for resistive loads) For inductive or capacitive loads, reduce at 50%
Ambient temperature	+0° C – +60° C
Protection	IP68 according to DIN EN60529
Float weight	0,79 Kg
Cable length	06 – 6 m cable – ref: 2504-E 10 – 10 m cable – ref: 2504-0-10E 15 – 15 m cable – ref: 2504-0-15E 20 – 20 m cable – ref: 2504-0-20E 30 – 30 m cable – ref: 2504-0-30E
Materials:
Float	Polypropylene
Cable	Double isolation PVC
Compression gland	EPDM