The floats are to be used to control the level in the filling and emptying processes of tanks and containers in which non-scaling clean or residual waters are used. Model with counterweight and activation ball made of Stainless Steel.

When the level of the liquid reaches the level of the float switch, the float changes its position an angle and activates a micro switch due to this deviation. When the level of the liquid overreaches the level of the float switch, the float floats, allowing its displacement to the next level of control. These levels depend on the correct position of the counterweight.

Control of the maximum and the minimum levels can be adjusted with only one float switch T-15E. The recommended maximum differential is 1 meter.

It is simple: the switch literally hangs on its own cable at the desired height and is fixed to the ceiling or to one side of the tank adjusting the distance of the counterweight. With this we obtain the right differential between maximum and minimum. The recommended maximum differential is 1 m.

Dimensions

Approximate measures given in mm.

Technical data

NameAutomatic float switch
TypeT-15 E – ref: 2503-…E
Density of the productFrom 0.76 Kg/l
Maximum pressure+3 bar
Switching voltage250 V AC
Switching function1 NO + 1 NC
Capacity of the contact8 A / 250 V AC (for resistive loads)
For inductive or capacitive loads, reduce at 50%
Ambient temperature-10° C – +60° C
ProtectionIP68 according to DIN EN60529
Float weight0,15 Kg
Counterweight weight0,26 Kg
Cable length02 – 2 m cable – ref: 2503-E
05 – 5 m cable – ref: 2503-1E
10 – 10 m cable – ref: 2503-2E
15 – 15 m cable – ref: 2503-3E
20 – 20 m cable – ref: 2503-4E
Other cable lenghts under request
Materials:
FloatPolystyrene
CableDouble isolation PVC
CounterweightStainless Steel AISI 1.4305
(Polystyrene shock resistance under request)
Activation ballStainless Steel AISI 1.4301

Explore all our level controls

Need more information?