SCP 30 PYN

Productos
Best selling solids and liquids controllers
SCP 30 PYN

SCP 30 PYN

Best selling solids and liquids controllers
Capacitive level indicators
Control of solids and liquids

Intended use

Simple model with 4 wires cable output and threaded body and PNP or NPN output selection. A load must be connected for a proper use.

The capacitive levels indicators SCP 30 PYN are to be used to control the maximum or minimum level of liquid like water, oil, chemical products, etc., in tanks or recipients or control the maximum or minimum level of bulk solids like feed, cereal, grain, etc., in silos or vessels. These devices also control the flow of these materials in pipes or are to be used to detect conductive or non-conductive materials through non-conductive walls.

The output of the devices are protected against overloads and short-circuits. Due to the encapsulation of the controllers, the devices are immune to noise or electrical interferences from mobiles, motors, etc.

Function

When the level of product reaches the controller, the electronic unit reverses the signal due to a change of the capacity of the environment. When the product disappears from the detection range, the signal turns to the initial position.

Mechanical connection

The standard form is mounting the device with the nuts or with the mounting accessory under request.

Drill a Ø 30 mm hole into the tank or silo wall, polish it, place the device and fixing it with the nuts or screw it into a flange or into an appropriate support to fix it.

If the mounting is made with the mounting accessory, drill a G 1 " 1/4 hole into the tank or silo wall, fix the accessory and screw the device on it. Under request, there are Galvanized or Stainless Steel G 1 " 1/4 nuts to fix the accessory to the interior of the wall as counter-nut.

Dimensions

Approximate measures given in mm.

Technical data


Name	Capacitive level indicator
Type	SCP 30 PYN – ref: 2803-0-002
Supply voltage	10 – 30 V DC
Output type	NO or NC depending on the selector
Current output	300 mA
Maximum voltage drop	< 2 V DC
Maximum ondulation	< 10 %
Sensitivity	Adjustable 0 – 20 mm depending on the material. Pre-adjusted to detect grain
Product temperature	-25° C – +70° C
Protection	IP67 according to DIN EN60529
Weight	0,27 Kg
Cable output	Connector M12, with a cable of 3 wires x 2 meters
Materials:
Housing	PBT
Cable	Double isolation PVC
Accesory (under request)	PVC