Displacement simple level indicator with protection box, cable entry M16, fixing bracket,and with cable 3x0.5 mm2 of 450 mm length.

The level indicator observes the level as a limit switch in hoppers or little containers and tipically for feeding. It can be used as a full and empty indicator for non sticky and easy flow bulk solids at atmospherical pressure.

The blade must to be exposed to the material.

The movement of the switch is the result of the pressure exerted by the incoming bulk material against the blade which forces the membrane to move backwards, reversing the position of the switch and the signal is used for example to control the transport system in the silo.

The mounting of the device is fixing the controller to the wall using screws. The standar mounting for the models ET is fixing the device using the bracket.


Approximate measures given in mm.

Technical data

NameDisplacement blade level indicator
TypeMAV ET ref: 2330-2
Maximum pressure250 V AC
Contact function1 NO + 1 NC
Capacity of the contact2 A / 250 V AC (for resistive loads)
For inductive or capacitive loads
Ambient temperature-10º C – +60º C
ProtectionIP40 according DIN EN60529
Weight0,20 Kg
Housing and bladePolyamide
Protection boxABS
Fixing bracketZincated steel

Explore all our level controls

Need more information?