Name | Flow switch |
---|---|
Type | LIT-VP –ref: 2606-5 |
Maximum pressure | +10 bar (+20º C) |
Cable output | 2 wires x 2 meters |
Maximum voltage | 250 V AC |
Contact function | 1 NO (Closed with flow) |
Capacity of the contact | 1 A / 250 V AC (resistive load) For capacitive or inductive loads reduce at 50% |
Ambient temperature | -30° C – +85° C |
Minimum flow | 1 l/min (not adjustable) |
Protection | IP65 according to DIN EN60529 |
Weight | 0,14 Kg |
Materials: | |
Housing and paddle | Noryl |
Cable | Double insulation PVC |
- Productos
- Flow switch for liquids
- LIT-VP
LIT-VP
Intended use
Model to be inserted in a pipe, vertically mounted with housing made of Noryl.
The flow switches are used to control the flow in tubes and pipes in which waters, oil, chemical products, etc. are used.
Function
There is free movement system inside the device. When the liquid flow of the pipe pulls the paddle actuates a REED switch.
Mechanical connection
The switch has to be insterted between a pipe using the thread proccess connection depending on the model.
The models must be vertically mounted (±15º).
The indication arrow in the body has to be faced to the flow.
For a proper function, the device must be installed in straigh pipes with a mininum length at least of five times the diameter and far from valves or filters to avoid turbulence.