Model with Stainless Steel housing to be used in applications with a maximum pressure up to +25 bar.

The different models of optical level indicators are used to control the level in tanks and containers, normally of reduced dimensions, in which non-scaling and clean waters, oil, chemical products, etc. are used.

The optical controllers bases their function on the reflection outline. There is a LED and a phototransistor inside the plastic housing of the sensor.

When there is no liquid covering the cupola, all the light from the LED is reflected to the phototransistor. When the level of liquid covers the cupola of the sensor, the reflection rate changes and some of the light is not reflected to the phototransistor and it activates the signal. When the liquid goes below the cupola, the signal switched back.

It is simple: The sensor is fixed in the tank or tube with the thread proccess connection G 3/8 ".

Dimensions

Approximate measures given in mm.

Technical data

NameOptical sensor
TypeL-05 – ref: 2700
Supply voltage10 – 40 V DC
Tank pressure+25 bar
Cable outputM12 connector and 3 wires
cable x 2 meters
Contact functionNPN
Capacity of the contact200 mA (resistive load)
For capacitive or inductive load reduce at 50%
Temperature range-40° C – +125° C
Protection IP65 according to DIN EN60529
Weight0,11 Kg
Materials:
HousingStainless Steel 1.4305
CupolaPolyfuson
CableDouble insulation PVC

Explore all our level controls

Need more information?