|Name||Vibrating level indicator|
|Type||ILV-150 – ref: 2190-0-500|
ILV-150 Sens. – ref: 2190-S-500
|Supply voltage||20 – 250 V AC/DC|
|Power consumption||3 VA|
|Density of the product|
|Standard model||From 0,02 t/m3|
|Sensitive model||From 0,01 t/m3|
|Maximum pressure||+10 bar|
|Cable entry||2 de M20x1,5|
|Relay output||2x (1 NO + 1 NC)|
8 A / 250 V AC
8 A / 24 V DC
1,5 A / 48 V AC
|Function status||Relay enabled: red LED|
|Resonance frequency||285 Hz|
|Detecting level||1 s|
|Starting vibrating||2 – 5 s|
|Product temperature||-40° C – +80° C|
(Under request up to +150º C)
|Ambient temperature||-40° C – +60° C|
|Housing||IP66 according to DIN EN60529|
|Sonda||IP67 according to DIN EN60529|
|Max. load upon the probe:|
|Max. cable load||200 Kg|
|Probe||Stainless Steel 1.4301|
Polyuretane and shielded cable
Vibrating level indicator with probe and rope shaft for vertical mounting. Strong and multivoltage model, with sensitivity adjustment and detection type adjustement. Versatile, with a wide range of applications.
To be used to control the maximum or minimum level of bulk solids in silos or vessels and recommended for dusty and powdery, granulated and grainy bulk goods like dust, flour, grain, sand, plastic, etc. with a minimum bulk density from 0.01 t/m3.
The probe must to be exposed to the material. The probe of these controllers is activated to its resonant frequency by a piezoelectric system. When the product covers the probe, the vibration is dampened and the control unit reverses the signal.
When the product disappears from the probe, it returns to the normal vibrating state and the signal turns to the initial position.
The device has to be mounted vertically.
The normal installation is by screwing the device onto the deposit wall, with a mounting flange or with an appropiate support to fix it.