Name | Electrode support for conductive probe |
---|---|
Type | CER ref: 2751-1 |
Body material | Stainless Steel 1.4305 |
Insulation material | PTFE |
Proccess connection | Thread G 1/2 " |
Electrical connection | 1 connection Ø 1,5 mm2 |
Temperature range | -20º C – +220º C |
Maximum pressure | +20 bar (+20º C) |
Electrode length | 100 mm (Threaded Stainless Steel 1.4305 or Polyolefine covered electrodes of Ø 6 mm under request) |
Intended use
The electrode support for conductive probe is used to control conductive liquids like water, normally in deposits or tanks with high temperature or high pressure.
The probe must be associated with the conductive control level relay L- ED, L-EPD, L-ED2, ...
Function
Normally, there is an electrode with the desired length associated with the electrode support. Due to the PFTE insulation, false signals are avoided in lateral mountings or environments with vapour.
Mechanical connection
It is simple: The electrode support is fixed in the tank or tube with the thread proccess connection.