BLR ATEX

{{ filteredProducts.length }} resultados

{{ product.title }}

BLR ATEX

ATEX controllers
Control of liquids

Intended use

Model with thread proccess connection.

The side mounting level switches are used to control the level in tanks and containers in which non-scaling or residual waters, oil, chemical products, etc. are used.

The models are certificated for use in potentially explosive Dust or Gas atmospheres hazardous areas.

Function

When the level of the liquid reaches the level of the float switch, the float changes its position an angle and activates a micro switch or a REED switch in high temperature models due to this deviation.

When the liquid level falls, the float moves back and the switch is disengaged.

Mechanical connection

The thread is G 1 " 1/2 tappered and the device can be fixed using 1 or 2 nuts or screwing the float in a pipe.

For a correct use of the level switch, the float must not touch the walls of the tank and it is necessary to ensure the free movement of the float.

For use in potentially explosive Dust or Gas atmospheres hazardous areas the installation must be done according to the Standard and Normative documents.

Dimensions

Approximate measures given in mm.

Technical data


Name	Float switch
Type	BLR ATEX – ref: 2514-A-001
Certifications:
Gas+Dust	ATEX II 2G EEx d IIB T4 ATEX II 2D IP65 135º C
Product density	0,65 Kg/l
Maximum pressure	+15 bar
Cable entry	G 1/2 "
Switching function	1 NO + 1 NC
Capacity of the contact	3 A / 250 V AC (for resistive loads) For inductive or capacitive loads, reduce at 50%
Product temperature	-10° C – +100° C
Ambient temperature	-20° C – +70° C
Protection	IP65 accordin to DIN EN60529
Weight	1,15 Kg
Materials:
Housing	Aluminium
Proccess connection	Stainless Steel 1.4301
Float	Stainless Steel 1.4301